Features & Benefits

---

• IDEAL FOR: Expansion joints, repairing cracks in concrete decks and floors, patios, sidewalks, driveways, basements and garages.
• SEALS: Concrete, galvanized steel, aluminum, wood and most common building materials.
• Excellent adhesion and flexibility
• Smooth, easy flow
• Designed for horizontal concrete joints
• VOC-compliant
• Compatible with all types of foam
• Self-leveling
• UV resistant

Application Guidelines

---

• Caulks & Sealants Calculators: Click to calculate the right amount of Titebond caulk or sealant.
• Application Temperature: Above 40°F (4°C). If used under 40°F, tooling may be required.
• Service Temperature Range: -75°F to 300°F (-59°C to 149°C)
• Method of Application: Cartridge/caulking gun
• Tooling Time: For a 1/4" bead, approximately 10 - 15 minutes, depending on temperature and humidity.
• Application Directions: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. 2. Remove nozzle, cut tip of the nub and puncture inner foil seal. 3. Screw nozzle onto cartridge and cut tip on slant to appropriate bead size and place in cartridge gun. 4. Allow sealant to flow smoothly over backer rod into the joint. No tooling is required. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
• Painting: Sealant is intended for exterior use. If used indoors, sealant may need to be painted. In most cases, painting may occur one hour after application with a high-quality acrylic, water-based (latex) paint that does not contain plasticizer. It is recommended to paint over sealant with a shellac-based primer before painting. For other paint types, a compatibility test is recommended.
• Cleanup: Clean uncured material with acetone or isopropyl alcohol. After curing, excess sealant must be cut or scraped away. Follow solvent vendor's precautions when using solvents.
• Coverage:

  Container	1/8” Bead	1/4" Bead	3/8" Bead	1/2" Bead
  10.1 oz. Cartridge	123 ft.	31 ft.	14 ft.	8 ft.
  28 oz. Cartridge	343 ft.	86 ft.	38 ft.	21 ft.

Physical Properties

---

• Type: Advanced polymer
• Reactive VOC: <50 g/L (<2%)
• Color: Gray
• Flashpoint: Solvent free/Not applicable
• Solids: 99%
• Freeze / Thaw Stability: Stable
• Viscosity: 110,000 cps
• Storage Life: 18 months in a dry location at or below 75°F

Limitations

---

Not designed for continuous submersion or use below the waterline. Air, sealant and surface temperature should be above 40°F. If used under 40°F, tooling may be required. Do not apply if rain is expected within one hour. Cure time is dependent upon ambient conditions including temperature and humidity. It is highly recommended to use backing material. Allow sealant to cure 48 hours before exposing to traffic. For best results, store in a dry location at or below 75°F. Due to high heat, it is NOT recommended to store sealants above the second shelf (>20 feet high) in a warehouse.

Product SKUs

---

Part Number	UPC	Case UPC	Size	Weight	Units Per Package	Packages Per Pallet	Color
3191	037083031911	10037083031918	10.1 Oz. Cartridge - Gray	15.07	12	108
3192	037083031928	10037083031925	28 Oz. Cartridge - Gray	38.18	12	44

Warranty Statement

---

Liability is limited to product replacement only.

---

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

---

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com