Features & Benefits

---

• Recommended For: Installing ceiling tiles over many common porous surfaces
• Compatible Materials: Acoustical ceiling tiles to many building materials including: painted and unpainted drywall, gypsum wallboard, concrete, hardboard, plywood and wood.
• Safe and easy installation
• Water-based
• For use on acoustical ceiling tiles
• Fast grab - excellent adhesion
• Nonflammable
• No offensive odor
• Water cleanup while wet
• No sag installation
• Passes ASTM D-1779 specification
• Environmentally safe
• VOC-compliant
• NFPA Class A fire rating when tested in accordance with ASTM E-84

Application Guidelines

---

• Application Temperature: Over 50°F for adhesive and substrates
• Service Temperature Range: 0°F to 120°F
• Working Time: 15 minutes
• Method of Application: Mason’s trowel
• Prep: Surfaces must be dry and free from any material that may deter adhesion.
• Application: Let adhesive and materials acclimate to room temperature 24 hours before installing. Note: Do not use when temperature, adhesive or materials are below 50°F. Using the “butter” method, spread a thin layer of adhesive to cover a large area of each corner of tile. Then apply adhesive in 1” to 1 ½” mounds (golf ball size). Place mounds 2“ to 3” in from the corners on the back of the tile. Immediately press tile into position, working the tile back and forth ½” to flatten the mound of adhesive. Adhesive should be flattened to a mound ³/16” thick and 2 ½” in diameter. When installing interlocking tile, do not slide tile into groove of adjacent tile until it has been pressed against the ceiling to its proper level.
• Cleanup: Tools and excess adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesive may be cleaned with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.

Physical Properties

---

• Type: Polymer emulsion
• State: Medium-viscosity mastic
• Color: Beige
• Solids: 70%
• Viscosity: 200,000 cps
• pH : 5.0
• VOC: <50 g/L
• Flashpoint: > 200°F
• Freeze / Thaw Stability: Stable
• Storage Life: More than 2 years in unopened container
• Odor: Mild

Limitations

---

For tiles larger than 12” x 12”, place a 1” to 1 ½” mound (golf ball size) of adhesive on each square foot corner. Please contact Technical Service at 1.800.347.4583 for questions concerning the amount of adhesive needed per panel. For best results, store Titebond Acoustical Ceiling Tile Adhesive above 50°F.

Product SKUs

---

Part Number	UPC	Case UPC	Size	Weight	Units Per Package	Packages Per Pallet
2704	037083027044		4 Gallon Pail	52.51	1	36
2706	037083027068	10037083027065	Gallon Pail	25.66	2	75

---

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

---

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com